Structural Steel Plates

Get A QuoteValue-Added Services

Plates

With a variety of steel plate grades and thicknesses in stock, you can have exactly what you need delivered to your shop or job site with next day delivery. While most steel suppliers carry one type of product, Intsel Steel West has plates, beams, angles, and more to cover your entire order with one shipment.

A36

A36-grade carbon steel works well for general applications for welded, bolted, or riveted plates. Up to 8” thick, these steel plates offer a minimum yield strength of 36 ksi and minimum tensile strength of 58 ksi. Any plates over 8” thick have a minimum yield strength of 32 ksi.

A572-50

As a high-strength, low-alloy steel, steel plate that meets A672-50 standards can be used in riveted, welded, and bolted applications requiring a reduced weight for cost savings. This columbium-vanadium steel plate up to 4” thick offers a minimum yield of 50 ksi. Intsel Steel West also offers Charpy V-Notch testing.

A588

This copper-bearing steel plate is high-strength and low-alloy for a minimum yield strength between 42 ksi and 50 ksi, with two to four times the corrosion resistance than carbon steel without copper. Intsel Steel West carries A588 plates up to 8” thick, and these plates can be used in any application requiring riveting, bolting, or welding. With the copper, they can lower costs due to their reduced weight and also eliminate concerns about atmospheric corrosion.

ASTM A516-GR70

Designed to store contents at high pressure, these pressure-vessel-quality steel plates are typically used in low-temperature applications such as vessels, tanks, and boilers where notch toughness is required. A516-GR70 grade steel is silicon0killed and made of a fine-grain structure. Available in normalized, as-rolled condition up to and including 1-1/2”.

T-1 Type B Construction Alloy Steel to A514

Used primarily for bridge fabrication, construction equipment, mining equipment and more, this quenched-and-tempered high-strength alloy steel has a minimum yield strength of 100ksi. This construction alloy steel works well for structural applications requiring the high-yield strength and toughness to reduce part size and weight.

Abrasion-Resistant Steel Plates up to 550

AR235 & AR400 steel plates provide a significantly longer life over an A36 made of lower carbon steel in applications with abrasion, impact, and wear. AR235 meets requirements for moderate-resistances and AR400 for higher-resistance. Because they are intended for structural and load-bearing, they should not be welded to avoid cracking. However, an abrasion-resistant steel plate can be machines, formed, and rolled when abrasive aggregates are used. Manufacturers use this steel plate for mining and earth-moving equipment, as well as liners, mixing drums, material handling, chutes, and hoppers.

Standard Plates Universal Mill Plates Floor Plate
Type Size Weight Per Ft.
Standard Plates 1 3/4 x 72 in 71.47 lb
Standard Plates 1 3/4 x 60 in 71.47 lb
Standard Plates 1 3/4 x 48 in 71.47 lb
Standard Plates 1 5/8 x 96 in 66.37 lb
Standard Plates 1 5/8 x 72 in 66.37 lb
Standard Plates 1 1/2 x 96 in 61.26 lb
Standard Plates 1 1/2 x 84 in 61.26 lb
Standard Plates 1 1/2 x 72 in 61.26 lb
Standard Plates 1 1/2 x 60 in 61.26 lb
Standard Plates 1 1/2 x 48 in 61.26 lb
Standard Plates 1 3/8 x 96 in 56.16 lb
Standard Plates 1 3/8 x 84 in 56.16 lb
Standard Plates 1 3/8 x 72 in 56.16 lb
Standard Plates 1 3/8 x 60 in 56.16 lb
Standard Plates 1 1/4 x 96 in 51.05 lb
Standard Plates 1 1/4 x 84 in 51.05 lb
Standard Plates 1 1/4 x 72 in 51.05 lb
Standard Plates 1 1/4 x 60 in 51.05 lb
Standard Plates 1 1/4 x 48 in 51.05 lb
Standard Plates 1 1/4 x 36 in 51.05 lb
Standard Plates 1 1/8 x 96 in 45.95 lb
Standard Plates 1 1/8 x 72 in 45.95 lb
Standard Plates 1 x 96 in 40.84 lb
Standard Plates 1 x 84 in 40.84 lb
Standard Plates 1 x 72 in 40.84 lb
Standard Plates 1 x 60 in 40.84 lb
Standard Plates 1 x 48 in 40.84 lb
Standard Plates 1 x 36 in 40.84 lb
Standard Plates 7/8 x 96 in 35.74 lb
Standard Plates 7/8 x 84 in 35.74 lb
Standard Plates 7/8 x 72 in 35.74 lb
Standard Plates 7/8 x 60 in 35.74 lb
Standard Plates 7/8 x 48 in 35.74 lb
Standard Plates 7/8 x 36 in 35.74 lb
Standard Plates 13/16 x 96 in 33.18 lb
Standard Plates 13/16 x 72 in 33.18 lb
Standard Plates 3/4 x 120 in 30.63 lb
Standard Plates 3/4 x 96 in 30.63 lb
Standard Plates 3/4 x 84 in 30.63 lb
Standard Plates 3/4 x 72 in 30.63 lb
Standard Plates 3/4 x 60 in 30.63 lb
Standard Plates 7/16 x 30 in 17.87 lb
Standard Plates 3/8 x 120 in 15.32 lb
Standard Plates 3/8 x 96 in 15.32 lb
Standard Plates 3/8 x 84 in 15.32 lb
Standard Plates 3/8 x 72 in 15.32 lb
Standard Plates 3/8 x 60 in 15.32 lb
Standard Plates 3/8 x 48 in 15.32 lb
Standard Plates 3/8 x 42 in 15.32 lb
Standard Plates 3/8 x 36 in 15.32 lb
Standard Plates 3/8 x 30 in 15.32 lb
Standard Plates 5/16 x 120 in 12.76 lb
Standard Plates 5/16 x 96 in 12.76 lb
Standard Plates 5/16 x 84 in 12.76 lb
Standard Plates 5/16 x 72 in 12.76 lb
Standard Plates 5/16 x 60 in 12.76 lb
Standard Plates 5/16 x 48 in 12.76 lb
Standard Plates 5/16 x 36 in 12.76 lb
Standard Plates 5 1/4 x 96 in 214.40 lb
Standard Plates 5 1/4 x 72 in 214.40 lb
Standard Plates 5 x 96 in 204.20 lb
Standard Plates 5 x 72 in 204.20 lb
Standard Plates 5 x 60 in 204.20 lb
Standard Plates 5 x 48 in 204.20 lb
Standard Plates 4 3/4 x 96 in 194.98 lb
Standard Plates 4 3/4 x 84 in 194.98 lb
Standard Plates 4 3/4 x 72 in 194.98 lb
Standard Plates 4 3/4 x 60 in 194.98 lb
Standard Plates 4 1/2 x 72 in 183.77 lb
Standard Plates 4 1/2 x 60 in 183.77 lb
Standard Plates 4 1/2 x 48 in 183.77 lb
Standard Plates 4 1/4 x 96 in 173.56 lb
Standard Plates 4 1/4 x 84 in 173.56 lb
Standard Plates 4 1/4 x 72 in 173.56 lb
Standard Plates 4 1/4 x 60 in 173.56 lb
Standard Plates 4 x 96 in 163.35 lb
Standard Plates 4 x 72 in 163.35 lb
Standard Plates 4 x 60 in 163.35 lb
Standard Plates 4 x 48 in 163.35 lb
Standard Plates 3 3/4 x 96 in 153.14 lb
Standard Plates 3 3/4 x 72 in 153.14 lb
Standard Plates 3 3/4 x 60 in 153.14 lb
Standard Plates 3 3/4 x 48 in 153.14 lb
Standard Plates 3 1/2 x 96 in 142.93 lb
Standard Plates 3 1/2 x 72 in 142.93 lb
Standard Plates 3 1/2 x 60 in 142.93 lb
Standard Plates 3 1/2 x 48 in 142.93 lb
Standard Plates 3 1/4 x 96 in 132.72 lb
Standard Plates 3 1/4 x 72 in 132.72 lb
Standard Plates 3 1/4 x 60 in 132.72 lb
Standard Plates 3 1/4 x 48 in 132.72 lb
Standard Plates 3 x 96 in 122.52 lb
Standard Plates 3 x 72 in 122.52 lb
Standard Plates 3 x 60 in 122.52 lb
Standard Plates 3 x 48 in 122.52 lb
Standard Plates 2 3/4 x 96 in 112.31 lb
Standard Plates 2 3/4 x 84 in 112.31 lb
Standard Plates 2 3/4 x 72 in 112.31 lb
Standard Plates 3/16 x 48 in 7.66 lb
Standard Plates 2 3/4 x 60 in 112.31 lb
Standard Plates 3/16 x 60 in 7.66 lb
Standard Plates 2 3/4 x 48 in 112.31 lb
Standard Plates 3/16 x 72 in 7.66 lb
Standard Plates 2 1/2 x 96 in 102.10 lb
Standard Plates 3/16 x 84 in 7.66 lb
Standard Plates 2 1/2 x 84 in 102.10 lb
Standard Plates 3/16 x 96 in 7.66 lb
Standard Plates 2 1/2 x 72 in 102.10 lb
Standard Plates 1/4 x 30 in 10.21 lb
Standard Plates 2 1/2 x 60 in 102.10 lb
Standard Plates 1/4 x 36 in 10.21 lb
Standard Plates 2 1/2 x 48 in 102.10 lb
Standard Plates 1/4 x 42 in 10.21 lb
Standard Plates 2 1/4 x 96 in 91.89 lb
Standard Plates 1/4 x 48 in 10.21 lb
Standard Plates 2 1/4 x 72 in 91.89 lb
Standard Plates 1/4 x 54 in 10.21 lb
Standard Plates 2 1/4 x 60 in 91.89 lb
Standard Plates 1/4 x 60 in 10.21 lb
Standard Plates 2 x 96 in 81.68 lb
Standard Plates 1/4 x 72 in 10.21 lb
Standard Plates 2 x 84 in 81.68 lb
Standard Plates 1/4 x 84 in 10.21 lb
Standard Plates 2 x 72 in 81.68 lb
Standard Plates 1/4 x 96 in 10.21 lb
Standard Plates 2 x 60 in 81.68 lb
Standard Plates 1/4 x 120 in 10.21 lb
Standard Plates 2 x 48 in 81.68 lb
Standard Plates 5/16 x 30 in 12.76 lb
Standard Plates 1 3/4 x 96 in 71.47 lb
Standard Plates 12 x 72 in 490.08 lb
Standard Plates 11 x 72 in 449.22 lb
Standard Plates 10 x 72 in 408.38 lb
Standard Plates 10 x 48 in 408.38 lb
Standard Plates 9 x 72 in 367.55 lb
Standard Plates 8 x 96 in 326.71 lb
Standard Plates 8 x 72 in 326.71 lb
Standard Plates 8 x 60 in 326.71 lb
Standard Plates 8 x 48 in 326.71 lb
Standard Plates 7 1/2 x 96 in 306.29 lb
Standard Plates 7 1/2 x 72 in 306.29 lb
Standard Plates 7 1/2 x 60 in 306.29 lb
Standard Plates 7 1/2 x 48 in 306.29 lb
Standard Plates 7 x 96 in 285.87 lb
Standard Plates 7 x 84 in 285.87 lb
Standard Plates 7 x 72 in 285.87 lb
Standard Plates 7 x 60 in 285.87 lb
Standard Plates 7 x 48 in 285.87 lb
Standard Plates 6 1/2 x 96 in 265.45 lb
Standard Plates 6 1/2 x 84 in 265.45 lb
Standard Plates 6 1/2 x 72 in 265.45 lb
Standard Plates 6 1/2 x 60 in 265.45 lb
Standard Plates 6 1/2 x 48 in 265.45 lb
Standard Plates 6 1/4 x 96 in 255.24 lb
Standard Plates 6 x 96 in 245.03 lb
Standard Plates 6 x 72 in 245.03 lb
Standard Plates 6 x 60 in 245.03 lb
Standard Plates 6 x 48 in 245.03 lb
Standard Plates 5 1/2 x 96 in 224.61 lb
Standard Plates 5 1/2 x 72 in 224.61 lb
Standard Plates 5 1/2 x 60 in 224.61 lb
Standard Plates 5 1/2 x 48 in 224.61 lb
Universal Mill Plates 1/4 x 9 in 7.66 lb
Universal Mill Plates 1/4 x 10 in 8.51 lb
Universal Mill Plates 1/4 x 11 in 9.36 lb
Universal Mill Plates 1/4 x 12 in 10.21 lb
Universal Mill Plates 5/16 x 9 in 9.57 lb
Universal Mill Plates 5/16 x 10 in 10.63 lb
Universal Mill Plates 5/16 x 11 in 11.70 lb
Universal Mill Plates 5/16 x 12 in 12.76 lb
Universal Mill Plates 3/8 x 9 in 11.49 lb
Universal Mill Plates 3/8 x 10 in 12.77 lb
Universal Mill Plates 3/8 x 11 in 14.04 lb
Universal Mill Plates 3/8 x 12 in 15.32 lb
Universal Mill Plates 7/16 x 9 in 13.40 lb
Universal Mill Plates 7/16 x 10 in 14.89 lb
Universal Mill Plates 7/16 x 12 in 17.87 lb
Universal Mill Plates 1/2 x 9 in 15.32 lb
Universal Mill Plates 1/2 x 10 in 17.02 lb
Universal Mill Plates 1/2 x 11 in 18.72 lb
Universal Mill Plates 1/2 x 12 in 20.42 lb
Universal Mill Plates 5/8 x 9 in 19.15 lb
Universal Mill Plates 5/8 x 10 in 21.27 lb
Universal Mill Plates 5/8 x 12 in 25.53 lb
Universal Mill Plates 3/4 x 9 in 22.97 lb
Universal Mill Plates 3/4 x 10 in 25.52 lb
Universal Mill Plates 3/4 x 12 in 30.63 lb
Universal Mill Plates 7/8 x 9 in 26.81 lb
Universal Mill Plates 7/8 x 10 in 29.78 lb
Universal Mill Plates 7/8 x 12 in 35.74 lb
Universal Mill Plates 1 x 9 in 30.63 lb
Universal Mill Plates 1 x 10 in 34.03 lb
Universal Mill Plates 1 x 12 in 40.840 lb
Universal Mill Plates 1 1/4 x 10 in 42.53 lb
Universal Mill Plates 1 1/4 x 12 in 51.04 lb
Universal Mill Plates 1 1/2 x 10 in 51.05 lb
Universal Mill Plates 1 1/2 x 12 in 61.26 lb
Universal Mill Plates 2 x 10 in 68.06 lb
Universal Mill Plates 2 x 12 in 81.68 lb
Type Thickness Stock Sizes (In.) Weight Per Sq. Ft. Weight Per Sheet
Floor Plate 1/8 48 x 96 6.16 197.00
Floor Plate 1/8 48 x 120 6.16 246.25
Floor Plate 1/8 48 x 144 6.16 295.68
Floor Plate 1/8 48 x 240 6.16 492.49
Floor Plate 1/8 60 x 120 6.16 307.81
Floor Plate 1/8 60 x 240 6.16 615.62
Floor Plate 1/4 48 x 96 11.26 360.36
Floor Plate 3/8 60 x 240 16.37 1636.60
Floor Plate 1/2 48 x 240 21.47 1717.60
Floor Plate 1/2 60 x 240 21.47 2147.00

Steel Suppliers in CO, CA, UT, and beyond

With a wide stock of steel plates in a range of grades, Intsel Steel West has all the steel you need for your next project. We supply steel to fabricators across the western United States in Colorado, California, Utah, Arizona, Nevada, New Mexico, Montana, Idaho, and Nebraska to deliver to almost any facility with next-day delivery. We can handle your inventory needs in our large warehouses, saving you time and money on storage and transportation.

David Taylor Digital | NJ Digital Marketing